News

Why Your Car Parking Barrier Do Not Work

Why Your Car Parking Barrier Does Not Work

A car parking barrier is one of the most important parts of an access control system. Most car parking barriers in a parking barrier system are automatic car park barriers. If the brake bar of the car parking barrier does not move, the parking lot system will break down.

car parking barrier.jpg

The brake bar may fail to work for the following reasons:

  1. No power supply, or the voltage is wrong. Check the car parking barrier power supply, or confirm that the supply voltage is within plus or minus 5% of the rated voltage.

  2. The fuse on the control box is blown. Check and replace it.

  3. Poor wiring. Find the location of the poor wiring and fix it.

  4. The control box is broken. Replace the control box.

  5. The brake pin between the spindle and the swing arm is damaged or dislocated. Adjust its position and re-fix it.

Tip: Please cut off the power when the barrier gate is not working, or the control box may burn out.

How to prevent this situation from happening:

  1. Carry out periodic inspection of the equipment.

  2. Buy your car park barrier from COMA.

COMA has been producing parking devices since 1996, and our car park barriers sell well all over the world.