News

What Issues Should Be Paid Attention To When Installing A Smart Parking System

In recent years, the number of vehicles in China has grown very rapidly, while the supply of parking spaces has fallen short, a situation hard to imagine ten years ago. Many domestic companies in the parking business are now thriving, and the term "smart parking system" prompts many people to ask whether a parking payment system is truly smart when they choose one. This has encouraged many commercial districts and residential areas to pay closer attention. Installing a smart parking system is an inevitable part of renovating a car park. So what issues should be considered when installing one?

%Parking system project layout%

The smart parking system is not only popular with drivers but also a valuable assistant for the car park administrator. The following points should therefore be considered when installing it:

1. Installation location of the barrier gate and control machine

The location of the barrier gate and the control machine (card reader) is critical because it affects user convenience. Generally, the distance between the barrier gate and the control machine should be no less than 2.5 metres; if it is too close, some vehicles may hit the boom while swiping a card, and the recommended distance is 3.5 metres. Lane width is another consideration: it should be no less than 3 metres, as a narrow lane hinders smooth entry and exit, and the recommended width is 4.5 metres.

2. The length of the gate lever

If the boom needs to be cut, the moment balance must be re-evaluated and recalculated according to the new lever length, which effectively avoids motor overheating and wear of the reducer.

3. The installation position of the surveillance camera

A standard smart parking system generally includes an image comparison function, so surveillance cameras must be installed at the entrance and exit. The camera's viewing angle should cover the position of the licence plate when the vehicle reads the card, and the installation height is generally 0.5 to 2.5 metres.

4. The installation position of the sentry box

Although it is a smart car park, someone still needs to attend to it at times. The guard box handles charging and management and is generally installed at the exit. It is a small office containing on-duty staff and a management computer, so it has an area requirement, generally no less than 4 square metres.

5. Installation location of the management computer

The car park system's management computer is generally placed in a sentry box or other management office. Its installation location must meet this requirement: the distance between the host computer and the card reading device should not exceed 200 metres. To ensure stable operation of the equipment afterwards, the performance of each part of the parking system must be reliable.

%Parking pay system%

The intelligent parking system greatly improves the utilisation rate of parking spaces and solves the problem of queuing at car park entrances and exits. It can effectively relieve the pressure on urban traffic, and installing it properly can also avoid future troubles. At the same time, regular maintenance is very important for the equipment.

/