News

What Is The Pedestrian Island Of Parking Management System

What Is The Pedestrian Island Of Parking Management System

Nowadays many parking lots need to be renovated to be more intelligent. Below is a brief description of the installation and precautions for parking lot equipment, the pedestrian island and the booth in a smart parking management system.

First, the pedestrian island

The pedestrian island is mainly used to hold parking facilities and prevent vehicles from colliding with them. Some parking lots need one, while others do not. The installation of a pedestrian island has the following requirements:

  1. Size of the pedestrian island. Its height is generally 10 to 15 cm above the ground, and the installation area for the equipment should be at least 10 cm larger than the equipment itself. This prevents the expansion screws from damaging the platform.

  2. If a pedestrian island is built on soft ground, a pit must be dug, and the island should extend more than 30 cm into the ground.

  3. On cement or asphalt pavement, a safety island can be built directly on the ground, but steel bars must be added. The method is to lay steel bars (Φ20 or larger) in a star shape at intervals of 25 cm; the bars should extend more than 5 cm into the ground and be exposed more than 5 cm.

Ticket system(5)

Second, the booth

The booth is mainly used to manage temporary vehicles and tolls. For parking lots without temporary vehicles, a booth is unnecessary. The booth is generally placed at the entrance and exit to make fee management convenient. It is usually equipped with a parking lot management computer and other equipment, and staff work inside. Its floor area should be more than 4 square meters.

ANPR2

Third, installation parameters of other parking equipment

  1. The distance between the parking management computer and the card reader is best kept under 100 meters, and the computer is usually placed in the booth.

  2. The center distance between the card reader and the gate is generally more than 2 meters, and about 2.5 meters is preferable.

  3. The license plate recognition camera should be installed at a height between 2 and 2.5 meters.

  4. The size of the ground loop is 2 meters by 0.8 meters.

  5. The minimum area of the booth is 2 by 2 meters, which is 4 square meters.

  6. The lane width of the parking lot should be greater than 3 meters.

If you would like to know more about our parking system, please visit: www.coma-carparking.com