The ground sense coil is a common device in parking systems. It detects the arrival and passing of vehicles such as cars, trucks and bicycles, and sends signals to related control equipment to support traffic management and reduce accidents. COMA Parking explains below how to install a ground induction coil.
%
%
Step 1: Choose a suitable location
First, choose a suitable place to install the coil. Whether on a highway or a city street, there are usually designated locations for this purpose. Carefully check the traffic flow at the intended site to ensure the location is reasonable and able to withstand impact.
Step 2: Clear the ground
Once the location is chosen, clean the ground first. Because the coil must sit closely against the ground, debris and dust can affect its sensitivity and durability, so use cleaning tools such as a vacuum cleaner or mop. Before cleaning, also measure the thickness and material of the ground to ensure the correct distance between the mounting bracket and the coil.
Step 3: Select the style
There are usually two basic styles of ground coil: round and square. A circular coil may be more suitable where traffic volume is high or visual impact is a concern. On a busy city road, a square coil is often preferable because it covers a larger area and is more durable.
Step 4: Install the coil
Coil installation must work closely with the infrastructure. Proceed as follows:
* Excavate a pit slightly larger than the coil according to its size, with a depth chosen reasonably for the site conditions. One side of the coil should sit close to the foundation and be stacked in the pit.
* On the inner side of the coil, clean a few centimetres of decorative strip to prevent impact between the coil and the equipment.
* Insert the plug on the coil into the matching socket, taking care not to connect the plug to the ground.
* Check the connection between the device and the connecting line to make sure it is stable.
Step 5: Protect the coil
Once installed, the coil needs basic maintenance to perform well throughout its service life. Here are some helpful protection tips:
* Avoid motor vehicles hitting the coil.
* Do not strike the coil with a chisel or other hard object.
* Do not install the coil under long-term direct sunlight.
* Regularly check the coil for wear or damage.