A barrier gate that does not close after a vehicle has passed is a problem customers sometimes encounter. The COMA car parking supplier introduces some methods to check it.
%
%
-
The grounding loop is buried incorrectly, or the coil is damaged or broken.
-
The power supply of the vehicle detector is insufficient (maximum 250 mA), or the sensor sensitivity is not adjusted properly (too high or too low).
-
The line encounters strong interference, such as when the communication line and the AC power line are laid in the same conduit.
-
If the line is too long and exceeds the effective communication distance (200 m), the signal will be seriously attenuated.
-
The ground terminal (signal ground) of the card reader control board and the AC power supply (power ground) are short-circuited, causing communication interference. When disconnected from the factory, they are in an offline working state; when connected to the computer, they must be short-circuited online.
-
The communication between the computer and the card reader is not working properly, so the controller cannot receive the door-open command.
COMA parking manufacturers have delivered more than 9,000 parking projects around the world. Parking entry ticket machines, exit ticket machines, card dispenser machines, ANPR/LPR barrier gate systems, smart parking management system software, parking flap lock units for outdoor parking, pay-and-display parking meters and toll management systems are our strengths.