The smart flat-panel parking locks currently used in road parking scenarios are mainly composed of a lock body, a lifting plate (baffle) and built-in modules for detection, power supply and communication. For the road construction of a parking lock solution, the parking lock only needs to be installed on the parking space, with no other construction such as wiring.
There are mainly two types of smart parking locks: the flat type and the ground type, with a small number of lifting column types as well. In the unactivated state, the flat type parking lock protrudes from the ground, standing 8 to 15 cm above it, while the ground type is basically flush with the ground. During installation, the flat type parking lock does not need to be dug down; only a few screws are needed to fix it to the ground, and it is usually installed in the middle of the inner side of the parking space (near the curb). The ground-mounted flat type parking lock, on the other hand, requires excavating the road surface and embedding the lock body so that it is flush with the ground in the non-activated state, and it is usually installed in the middle of the outer side of the parking space. At present, more than 70% of parking lock projects applied on the ground use the flat type.
When a vehicle enters the parking space, the detection module starts timing, and after the free time period the baffle is lifted and billing begins. The relevant data is uploaded to the platform synchronously through the 4G/5G/NB IoT card. When parking is over, the owner completes payment by scanning a code, after which the baffle is lowered and the vehicle drives away. The payment QR code is usually posted on the outer parking space line, making it convenient for car owners to find and scan. Some flat locks also display it on the lock body at the same time.
The vehicle detection methods of flat-panel parking locks currently mainly include ultrasonic, laser, millimeter wave radar, geomagnetism and pressure sensing. In order to improve detection accuracy, most companies use dual-mode sensing, such as "ultrasonic + laser", "ultrasonic + pressure sensing" and "ultrasonic + millimeter wave".