A parking lock is a mechanical device that stops other people from occupying your parking space and allows your own car to park there.
-
The parking lock is generally installed at one-third of the way into the parking space, and the ground must be concrete.
-
Determine the position of the lock within the space. It is recommended to install it at the one-third position, and it must be fitted on a flat, dry concrete floor.
-
First open the power lock with the key and remove the mounting lock on the bottom layer. Then use the installation marks shown in the picture to mark four points on the ground.
-
Use a hammer drill to bore a hole about 50 mm deep at each of the four marks. The diameter should be 8-10 mm.
-
Fit the iron plate to the floor with a socket wrench.
-
Fix the iron plate to the floor, then fix the parking lock to the iron plate. Finally, secure it with a lock. The installation is now complete.
-
After installing the parking lock, press the start button on the remote control to raise and lower it several times. Once you have confirmed there are no errors, the parking lock is ready for official use.

To learn more about the COMA parking lock, kindly follow this link: COMA parking lock