COMA provides complete parking management systems for its customers. The following is the RFID system.
The card reader is usually mounted on a column with a bracket, as shown in the picture below.
The column is installed at the roadside, next to the barrier. Its height is generally 1.8 m and its diameter is 30-60 mm.

RFID single-lane installation diagram.

RFID single-lane side installation.

RFID extra-wide lane side installation.

Installed at the top.
RFID parking system in-out working process
VIP in-out (tag fixed): the tag is read automatically while the car drives in and out without stopping.
When the car reaches the entry or exit, the barrier rises automatically to allow access. After the car passes, the barrier lowers automatically. At the same time, the corresponding plate number, card number, and entry time stored in the RFID tag are displayed and saved to the management computer.
Swing in-out: if the car's anti-explosive film interferes strongly with card reading, the driver can open the window and wave the card at a distance of about 2 m from the reader, or slowly move forward at a distance of 5 m while holding the card out of the window for reading. Once the card is read, the barrier opens; after the car passes, the barrier lowers automatically.

If you want to know more about COMA products, kindly follow this link: www.coma-carparking.com