Products
RFID Readers Based Vehicle Access Control Long Range Parking System

RFID Readers Based Vehicle Access Control Long Range Parking System

RFID tag long range parking system is mostly used for drivers who park their cars here for long-term. Drivers stick the tags on their vehicle's windshield.

RFID readers based vehicle access control long range parking system

RFID tag4.jpg

Guangzhou Coma Ltd.offers a reliable range of automated access control systems tailored to car park application. The integrated solutions include ticket systems,swipe cards,Automatic Number Plate Recognition(ANPR) or long range RFID tag parking management system. A well designed car parking system can be a successful revenue generator.

This card reader is the combination of antenna and RFID card reader. It is compatible with passive RFID recognition standard ISO18000-6B and 6C/EPC G2. It can read and operate all the RFID tag based on above standard. Power supply interface is DC12V,communication interface RS485. RS232 and USB is optional. It is widely used in car park, access control, ETC, intelligent traffic information system, logistic monitoring, etc

RFID tag parking management system allows a non-stop,hands free vehicle access. The reading distance is more than 8m .The parkers do not need to roll down the window or get off to get a card, then there will be no stop at the entrance which can avoid the trouble of entrance peaks and bad weather.

Parameter

Working frequency 902-928 MHz,frequency hopping is optional
Reading distance >8m,it varies for different tag and environment.
Communication interface standard RS485 interface, weigand 26,weigand 34. RS232,USB are optional
Power supply DC12V,1.5A
Antenna 6dBi linear polarized antenna is installed inside
Working temperature -30℃ to +65℃
working humidity < 95% RH

Outlook of the reader

RFID tag types

Installation instruction

The card reader is generally fixed to the column by a bracket (as below picture)

The column is installed at the road side(next to barrier),height is generally 1.8m, diameter 30-60mm

Car park application

In-out working process

VIP In-out(tag is fixed):it is auto-induction when car goes in and out without stop.

When the car comes to the entry or exit, the barrier will automatically rise up to allow access. After the car passes through the barrier, the barrier will fall down automatically. At the same time, the corresponding car plate No, card No, and entry time stored in the RFID tag will show and the data is stored in the computer.

Swing in-out: If the car anti-explosive film has a great impact for card reading, then the driver can open the window and swing the card at the distance around 2m from the card reader, or driver can slowly move forward at the distance of 5m and simultaneously reach the card out of window for reading. After reading, the barrier will open. After passing through, the barrier will automatically fall down.

About metal film

Send Inquiry

Contact Us