News

What Are Some Faults And Solutions Of The Parking Lot License Plate Recognition System?

License plate recognition systems are now widely used in public places such as parking lots, highway entrances and toll lanes. Failures are inevitable during use, so COMA will explain several common problems and their solutions in detail.

license plate recognition

1. The license plate recognition image cannot be output. In this case, check whether the connection line between the camera and the control board is connected correctly, whether the lens drive line is broken or abnormally connected, whether the camera is outputting image data, and whether the recognition system is outputting image data.

2. The message "no license plate" appears when a car passes. This is generally an image input problem. Check whether the license plate recognition camera is working normally, whether the image is clear, and whether the camera position has shifted. Adjust the camera position as needed.

3. The message "acquiring license plate" appears. This failure is mainly caused by communication between the license plate recognition host and the industrial computer. Check whether the license plate recognition device has started normally and whether the lane network is abnormal, or contact the monitoring center to check the lane configuration file.

4. The software does not respond when a car passes and triggers the capture coil. This kind of fault is usually caused by the industrial computer not receiving the trigger signal, which prevents the license plate recognition host and the charging software from working.