News

Potential Faults And Solutions For Parking Lot License Plate Recognition Systems

License plate recognition systems are now widely used in public places such as parking lots, highway entrances, and toll lanes. During use, some faults are inevitable. Below, COMA explains several common faults and their solutions.

  1. The license plate recognition image cannot be output. In this case, check whether the connection cable between the camera and the control board is correct; whether the lens drive cable is broken or has an abnormal connection; whether the camera is outputting image data; and whether the recognition system is outputting image data.

  2. "No license plate" is displayed when a vehicle passes. This is generally a problem with the image input. Check whether the license plate recognition camera is malfunctioning, whether the image is clear, and whether its position is offset. Adjust the camera position appropriately.

  3. "Acquiring license plate" is displayed. This fault is mainly caused by communication issues between the license plate recognition host and the industrial control computer. We need to check whether the license plate recognition equipment starts normally, whether there are any abnormalities in the lane network, or contact the monitoring center to check the lane configuration file.

  4. When the vehicle passes over the camera coil, the software does not respond. This type of fault is usually caused by the industrial control computer not receiving the trigger signal, which prevents the license plate recognition host and the toll collection software from working.