News

Folding Gate Stop Introduction

A folding barrier boom is mainly installed on the barrier gate housing at the entrance and exit of an underground garage or an indoor parking lot to control vehicle access. It consists of a main boom and an auxiliary boom. The left end of the main boom is hinged to the right end of the auxiliary boom, and the right end of the main boom is fixed to the power output shaft on top of the barrier gate housing.

At the left end of the main boom there is a joint, in which a double-head bolt slides inside the round hole. The ends of the double-head bolt are connected to a linkage plate. Another double-head bolt is inserted into a round hole below the left part of the main boom. At the left ends of the two linkage plates, two short double-head bolts connect a rod, and the bottom of this rod is connected to the ends of a long double-head bolt that passes through a round hole in the reinforcement plate at the right end of the auxiliary boom.

Through this linkage, the auxiliary boom folds and unfolds together with the main boom, allowing the barrier to open and close smoothly in places where space is limited.